Will USP <800> have an impact on medical device engineering?

Icons representing the stages of hazardous drug handling in healthcare, including compounding, receiving, cleaning, transport, storage, waste disposal, spills, patient care, administration, and dispensing.

USP <800> sets standards for handling hazardous drugs in healthcare settings. Learn who is at risk, what the chapter covers, and how it may shape closed-system medical device designs for OEM teams.

 

Published: 9/18/2023 | Updated: 11/5/2026



Key Takeaways

  • USP <800> protects healthcare workers: The chapter sets standards for safely handling hazardous drugs to protect personnel, patients, and the environment from exposure.
  • More roles are at risk than expected: Beyond pharmacists and nurses, the article lists roles like respiratory therapists, home health aides, housekeeping, environmental services, and veterinary staff.
  • The chapter covers the full drug-handling lifecycle: Its 11 key components range from risk assessment and engineering controls to PPE, compounding, administration, waste management, training, and documentation.
  • Facility risk assessments may drive device requests: Hospitals assessing their USP <800> risks may look for devices that reduce exposure during drug preparation and administration.
  • Closed-system designs reduce exposure: Devices that contain hazardous drugs, such as sealed pill-crushing systems or infusion lines without residual drug in dead spaces, can help limit exposure.
  • Components support safer designs: Stopcocks, manifolds, luer-activated valves, and filters are examples of components that can support closed-system device designs.

When treating patients, hospital and healthcare personnel routinely encounter hazardous medications. The National Institute for Occupational Safety and Health (NIOSH) defines a drug as hazardous if it exhibits one or more of the following characteristics in humans or animals: carcinogenicity, teratogenicity or developmental toxicity, reproductive toxicity, organ toxicity at low doses, genotoxicity or structure and toxicity profiles of new drugs that mimic existing hazardous drugs2,3,4. For more information on drugs that are considered hazardous, see the NIOSH website1.

Traditionally, the hazards around drug management have been limited to compound pharmacy. U.S. Pharmacopeia general chapter USP <800> recognizes that there is a greater group of people that could have direct contact with these medications daily and need to be protected against the effects of these hazardous drugs1,4. This list not only includes the healthcare professionals who create and administer the drugs, but also delivery and cleaning personnel who may be at risk from damaged or contaminated containers.


Two people icons beside a warning symbol, representing the healthcare workers at risk of hazardous drug exposure under USP 800.

Who is at risk?

  • Pharmacists
  • Pharmacy Technicians
  • Nurses
  • Physicians
  • Surgeons
  • Physician Assistants
  • Respiratory Therapists
  • Home Health Aides
  • Nurses' Aides
  • Housekeeping
  • Janitorial Services
  • Environmental Services
  • Veterinarians
  • Veterinarian Technicians
  • Veterinarian Assistants

USP <800> was officially published as a general chapter on December 1, 2019. It outlines where exposure can occur and provides comprehensive guidance on various aspects of handling hazardous drugs, including receipt, storage, compounding, administration and disposal.


Infographic: How can exposure occur? Every aspect of handling hazardous drugs may result in exposure if proper precautions are not taken. Stages shown: receiving, cleaning, transport, storing, dispensing, administering, patient care, spills, disposal and managing waste, and compounding.

There are 11 key components to the chapter:

  • Scope and purpose
  • Definitions
  • Risk assessment
  • Facility and engineering controls
  • Personal protective equipment (PPE)
  • Compounding
  • Administration and dispensing
  • Waste management
  • Training and competency
  • Documentation
  • Implementation

These components document how a risk analysis should be conducted at a facility to assess the possibility of drug exposure to the staff. The analysis should cover the full lifecycle of the hazardous drug, from receipt at the facility to administration and exiting the facility, either as a delivery to another facility or through waste disposal. Guidance is included on the type and amount of personal protective equipment that should be used at each stage by the facility's staff, how to create effective processes to document each stage and what should happen if a drug exposure or spillage occurs.

These are all supported by other standards within the U.S. Pharmacopoeia:

  • USP <795> Pharmaceutical Compounding – Nonsterile Preparations
  • SP SP <797> Pharmaceutical Compounding – Sterile Preparations
  • USP <825> Radiopharmaceuticals – Preparation, Compounding, Dispensing and Repackaging
  • USP <917> Radioactivity When Handling Radiopharmaceuticals
  • USP <1207> Sterile Product Packaging
  • USP <Weighing on an Analytical Balance – Accurate Weighing Techniques
  • USP General Chapters <1000> - <1999> - Dosage Forms, Compounding Procedures and Equipment
  • USP General Chapters <1200> - <1299> - Documentation Practices, Quality Assurance and Risk Management

Since its publication in 2019, USP <800> has been an “informational” standard. However, with the recent updates of USP <795> and <797>, USP <800> will become a federally enforced standard in November 2023. There will be a six-month grace period for facilities and their staff to ensure the requirements are fulfilled to meet this standard.

How does USP <800> impact medical device original equipment manufacturers (OEM)?

As USP <800> impacts hospital environments, it may be difficult to predict how this will impact the design and execution of medical devices meant for hospital use. Although medical devices will not need to be USP <800> compliant directly, considerations in the design phase will aid hospital decision-makers in sourcing the equipment that helps them meet the standard. These facilities will be searching for solutions to risks that could result in spills, splashes or surface contamination based on their risk analyses. Dust created during the dispensing or administration of hazardous drugs in pill form can be inhaled or can contaminate an area. This is just as hazardous as spillages of hazardous medications in liquid form.

Qosina is already starting to see instances where the outcome of these risk analyses has influenced product design.

A company that makes pill-crushing devices was asked to design a bag in which the pill could be sealed prior to crushing so that the nurses would not inhale dust particles from the pills. An oral or enteral syringe filled with fluid is attached to the bag in order to create a solution out of the pulverized medication. The attached syringe would then be used to extract the solution for patient administration. The simple yet clever addition of a luer to the bag to attach the syringe ensures the nurse is never exposed to the medication's particles or solution.

Additionally, there may be an increase in requests for infusion lines to become closed systems. Where hospital personnel were once willing to disconnect and reconnect infusion lines to flush the line or administer additional medication, the use of stopcocks or manifolds may now be requested in the design. Stopcocks or manifolds would reduce the need to disconnect the medication, which will, in turn, reduce the risk of exposure.

To meet USP <800>, any medical device that is used in the administration of a hazardous drug must be a closed system. The drug must be administered and the medical device disposed safely without any chance of contamination or exposure. This means that there should be no drug in dead spaces or tubing that could leak out. Apart from the addition of stopcocks, luer-activated valves, balloons, filters and other containment methods could be used to ensure that a medical device can be redesigned as a closed system and therefore ensure the safety of healthcare workers.

Developing a product that considers USP <800> not only ensures the safety and well-being of its users but also creates a unique selling point that addresses the facilities’ compliance requirements.

Design With Safer Drug Handling in Mind

As healthcare facilities work to reduce hazardous drug exposure, devices designed with closed systems and safe handling in mind can stand out. Choosing the right components early helps support those design goals. Connect with Qosina to discuss components for your next medical device project.

Connect with Qosina

 

References

*Information and info graphics from the USP.org website USP 800 | USP

  1. https://www.cdc.gov/niosh/topics/hazdrug ↩
  2. Hansen J, Olsen JH. Scand J Work Environ Health. 1994 Feb;20(1):22-6 ↩
  3. Connor TH, et al. J Occup Environ Med. 2010 Oct;52(10):1019-27 ↩
  4. USP General Chapter Hazardous Drugs – Handling in Healthcare Settings. ↩
    https://www.usp.org/compounding/general-chapter-hazardous-drugs-handling-healthcare