Safety Side Snap Non-Luer Connectors
April 29, 2008
Safety Side Snap Non-Luer Connectors


To connect, push the
two sides together.
To disconnect, apply force
in the middle of the connection.

A popping sound occurs
to let the user know
the line is disconnected.









Safety Side Snap non-luer connectors
are designed to eliminate
the possibility of inter-connectivity
between functionally dissimilar
medical tubes and catheters.

These economical stock non-luer components
resist axial force so that tubing
can be tugged without disconnecting.

• Available in a choice of
acetal and polypropylene,
with and without O-Rings

• Designed to fit 5/32 inch I.D. tubing

• 5 psi pressure rating

Male Safety Side Snap Connectors  
Part #
Material
Acetal
Polypropylene
     
Female Safety Side Snap Connectors
Part #
Material
O-Ring
Acetal
Buna-N
Acetal
EPDM
Polypropylene
Buna-N
Polypropylene
EPDM

Qosina offers many non-luer connectors
that can improve the safety
of your designs without the
need to create a custom tool
Large Bore
Non-Luer Fittings
Designed Incompatibility

150-Q Executive Drive, Edgewood, NY, 11717, USA
Phone: (631) 242-3000 Fax: (631) 242-3230
Visit Qosina.com New Products Trade Show Schedule Contact Us Qosina Catalog Qosmedix Catalog Large Bore, Safety Side Snap