New Products

View as Grid List
Sort by
Display per page
RSS
New
T7054

Cellgyn® TPE Tubing

68A Durometer; 1/4 inch ID x 7/16 inch OD (0.25 inch x 0.438 inch,...
TPE
New
T7055

Cellgyn® TPE Tubing

68A Durometer; 1/4 inch ID x 1/2 inch OD (0.25 inch x 0.5 inch, 6....
TPE
New
T2229

Sani-Tech® SPT-60L Tubing

60 A Durometer; 1/4 inch ID x 3/8 inch OD (0.25 inch x 0.375 inch,...
Silicone
New
T2230

Sani-Tech® SPT-60L Tubing

60 A Durometer; 1/4 inch ID x 7/16 inch OD (0.25 inch x 0.438 inch...
Silicone
New
T4116

Tygon® ND-100-65 Tubing

65A Durometer; 1/4" ID x 3/8" OD (0.25 inch x 0.375 inch, 6.35 mm ...
DEHP-Free PVC
New
T4117

Tygon® ND-100-65 Tubing

65A Durometer; 1/4" ID x 7/16" OD (0.25 inch x 0.438 inch 6.35 mm ...
DEHP-Free PVC
New
T7032

Pharma-Clear® R Series Tubing

61A Durometer; 1/4 inch ID x 1/2 inch OD (0.25 inch x 0.5 inch, 6....
Silicone, Polyester
New
T2307

Braided Tuflux® SIL Tubing

60A Durometer; 1/4 inch ID x 1/2 inch OD (0.25 inch x 0.5 inch, 6....
Silicone, PET
New
T7070

Pharma-Clear® LH Tubing

50A Durometer; 1/4 inch ID x 3/8 inch OD (0.25 inch x 0.375 inch, ...
Silicone
New
T7071

Pharma-Clear® LH Tubing

50A Durometer; 1/4 inch ID x 3/8 inch OD (0.25 inch x 0.375 inch, ...
Silicone
New
T7072

Pharma-Clear® LH Tubing

50A Durometer; 1/4 inch ID x 1/2 inch OD (0.25 inch x .5 inch, 6.3...
Silicone
New
34014

Tubing Weight, Natural

Qosina part number 34014 is an autoclavable PTFE tubing weight ideal for keeping tubing at the bottom of a container. It could be used as an alternative to rigid dip tubes and reduces the risk of suction against a container.
Fits 1/4 inch ID Tubing (0.25 inch, 6.35 mm)
PTFE
New
T3533

Liveo™ Pharma-80 Tubing

Manufactured by DuPont™ Liveo™ Healthcare Solutions, this Liveo™ Pharma-80 silicone tubing is designed for the transfer of high-purity fluids in pharmaceutical and biotechnological manufacturing processes in vacuum applications or those with moderate to high pressures. This product is not to be used in medical applications involving implantation in the human body or contact with internal body fluids and tissues for longer than 72 hours.
80A Durometer; 1/4 inch ID x 7/16 inch OD (0.25 inch x 0.438 inch,...
Silicone
New
62240

NovaSeal™ Pinch Pipe

This NovaSeal™ pinch pipe can be installed on compatible tubing and used to seal and separate the flow path once the pinch pipe is crimped and cut, enabling the sterile separation of tubing in controlled and non-controlled environments. Compatible with a variety of silicone and TPE tubing, this pinch pipe is designed for use with the battery-powered NovaSeal™ crimping tool. Please contact Qosina for a list of compatible tubing.
Fits 1⁄4 inch ID x 1⁄2 inch OD Tubing (0.25 inch x 0.5 inch, 6.35 ...
Nickel Plated Brass
New
28631

Flexsafe® 2D Bag Chamber, 2 Ports, Non-Sterile

Qosina part number 28631 is a robust fluid storage and transfer bag chamber ideal for upstream and downstream bioprocessing applications. Manufactured with Flexsafe® S80 film, this multilayer film is composed of a polyethylene (PE) contact layer and co-extruded PE-EVOH-PE backbone structure, allowing for superior gas barrier properties. This film offers excellent biocompatibility, a low extractables profile, and superior strength and flexibility. It features a boat port design, made of PE, and includes a hanging hole for improved handling.
250 ml; Both Ports Fit 1/8 inch ID Tubing (0.125 inch, 3.18 mm)
PE
New
20503

Aramus™ 2D Bag Chamber, 2 Ports, Non-Sterile

Qosina part number 20503 is a high-performance fluid storage and transfer bag chamber ideal for bioprocessing applications requiring reduced risk of product loss, contamination and comprised quality for critical process fluids and high-value final products. Manufactured with gamma-stable fluoropolymer, this single-layer film does not contain curing agents, antioxidants, plasticizers, or adhesives.  Additionally, 20503 has a low particle count, greatly reducing the potential for process fluid contamination. This film provides high purity, exceptional compatibility, increased safety, and has a wide operating temperature range of -196°C to 121°C, making it extremely durable in frozen applications. Featuring a fluoropolymer boat port design and including a hanging opening for improved handling, 20503 has comprehensive chemical compatibility including 100% DMSO.
250 ml; Both Ports Fit 1/8 inch ID Tubing (0.125 inch, 3.18 mm)
Fluoropolymer
New
42062

Molded Cross Component, Liveo™ Pharma-50 Tubing

Qosina part number 42062 is a molded tubing component eliminating the need for retention devices on molded connections and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 18 inches of tubing on all sides, allowing it to be cut to length before incorporating into a single-use design if required. This item is manufactured in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements. This product is not to be used in medical applications involving implantation in the human body or contact with internal body fluids and tissues for longer than 72 hours.
All Sides: 50A Durometer; 1/4 inch ID x 3/8 inch OD (0.25 inch x 0...
Silicone
New
42042

Molded T Component, Liveo™ Pharma-50 Tubing

Qosina part number 42042 is a molded tubing component eliminating the need for retention devices on molded connections and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 18 inches of tubing on all sides, allowing it to be cut to length before incorporating into a single-use design if required. This item is manufactured in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements. This product is not to be used in medical applications involving implantation in the human body or contact with internal body fluids and tissues for longer than 72 hours.
All Sides: 50A Durometer; 1/4 inch ID x 3/8 inch OD (0.25 inch x 0...
Silicone
New
42052

Molded Y Component, Liveo™ Pharma-50 Tubing

Qosina part number 42052 is a molded tubing component eliminating the need for retention devices on molded connections and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 18 inches of tubing on all sides, allowing it to be cut to length before incorporating into a single-use design if required. This item is manufactured in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements. This product is not to be used in medical applications involving implantation in the human body or contact with internal body fluids and tissues for longer than 72 hours.
All Sides: 50A Durometer; 1/4 inch ID x 3/8 inch OD (0.25 inch x 0...
Silicone
New
T7073

Pharma-Clear® LH Tubing

50A Durometer; 5/16 inch ID x 1/2 inch OD (0.313 inch x 0.5 inch, ...
Silicone
New
T4118

Tygon® ND-100-65 Tubing

65A Durometer; 5/16" ID x 1/2" OD (0.313 inch x 0.5 inch, 7.94 mm ...
DEHP-Free PVC
New
T2231

Sani-Tech® SPT-60L Tubing

60 A Durometer; 5/16 inch ID x 1/2 inch OD (0.313 inch x 0.5 inch,...
Silicone
New
T7056

Cellgyn® TPE Tubing

68A Durometer; 5/16 inch ID x 1/2 inch OD (0.313 inch x 0.5 inch, ...
TPE
New
T7025

Pharma-Clear® 65 Tubing

61A Durometer; 5/16 inch ID x 1/2 inch OD (0.313 inch x 0.5 inch, ...
Silicone