New Products

View as Grid List
Sort by
Display per page
RSS
New
T7033

Pharma-Clear® R Series Tubing

61A Durometer; 3/8 inch ID x 5/8 inch OD (0.375 inch x 0.625 inch,...
Silicone, Polyester
New
T7074

Pharma-Clear® LH Tubing

50A Durometer; 3/8 inch ID x 1/2 inch OD (0.375 inch x 0.5 inch, 9...
Platinum-Cured Silicone
New
T7075

Pharma-Clear® LH Tubing

50A Durometer; 3/8 inch ID x 9/16 inch OD (0.375 inch x 0.563 inch...
Silicone
New
T7076

Pharma-Clear® LH Tubing

50A Durometer; 3/8 inch ID x 5/8 inch OD (0.375 inch x 0.625 inch,...
Silicone
New
34013

Tubing Weight, Natural

Qosina part number 34013 is an autoclavable PTFE tubing weight ideal for keeping tubing at the bottom of a container. It could be used as an alternative to rigid dip tubes and reduces the risk of suction against a container.
Fits 3/8 inch ID Tubing (0.375 inch, 9.53 mm)
PTFE
New
T4119

Tygon® ND-100-65 Tubing

65A Durometer; 3/8" ID x 5/8" OD (0.375 inch x 0.625 inch, 9.53 mm...
DEHP-Free PVC
New
T2232

Sani-Tech® SPT-60L Tubing

Sani-Tech® SPT-60L is a premium platinum-cured silicone tubing designed for extended duration pumping including final filling. It provides best-in-class accuracy and precision to ensure consistent filling performance and reduces the potential for costly over or under fills. In addition, Sani-Tech® SPT-60L provides a long pump life, low spallation, and delivers ideal performance for the most demanding operations. Sani-Tech® SPT-60L is not intended to be used as part of an implantable device.
60 A Durometer; 3/8 inch ID x 5/8 inch OD (0.375 inch x 0.625 inch...
Silicone
New
62241

NovaSeal™ Pinch Pipe

This NovaSeal™ pinch pipe can be installed on compatible tubing and used to seal and separate the flow path once the pinch pipe is crimped and cut, enabling the sterile separation of tubing in controlled and non-controlled environments. Compatible with a variety of silicone and TPE tubing, this pinch pipe is designed for use with the battery-powered NovaSeal™ crimping tool. Please contact Qosina for a list of compatible tubing.
Fits 3/8 inch ID x 5/8 inch OD Tubing (0.375 inch x 0.625 inch, 9....
Nickel Plated Brass
New
T2312

Braided Tuflux® SIL Tubing

60A Durometer; 3/8 ID x 5/8 OD (0.375 inch x 0.625 inch, 9.53 mm x...
Silicone, PET
New
42063

Molded Cross Component, Liveo™ Pharma-50 Tubing

Qosina part number 42063 is a molded tubing component eliminating the need for retention devices on molded connections and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 18 inches of tubing on all sides, allowing it to be cut to length before incorporating into a single-use design if required. This item is manufactured in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements. This product is not to be used in medical applications involving implantation in the human body or contact with internal body fluids and tissues for longer than 72 hours.
All Sides: 50A Durometer; 3/8 inch ID x 5/8 inch OD (0.375 inch x ...
Silicone
New
42053

Molded Y Component, Liveo™ Pharma-50 Tubing

Qosina part number 42053 is a molded tubing component eliminating the need for retention devices on molded connections and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 18 inches of tubing on all sides, allowing it to be cut to length before incorporating into a single-use design if required. This item is manufactured in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements. This product is not to be used in medical applications involving implantation in the human body or contact with internal body fluids and tissues for longer than 72 hours.
All Sides: 50A Durometer; 3/8 inch ID x 5/8 inch OD (0.375 inch x ...
Silicone
New
42043

Molded T Component, Liveo™ Pharma-50 Tubing

Qosina part number 42043 is a molded tubing component eliminating the need for retention devices on molded connections and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 18 inches of tubing on all sides, allowing it to be cut to length before incorporating into a single-use design if required. This item is manufactured in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements. This product is not to be used in medical applications involving implantation in the human body or contact with internal body fluids and tissues for longer than 72 hours.
All Sides: 50A Durometer; 3/8 inch ID x 5/8 inch OD (0.375 inch x ...
Silicone
New
34019

Check Valve, Barbed

Fits 1/2 inch ID Tubing (0.5 inch, 12.7 mm); 0.4 – 1 psi CP
MBS, Silicone
New
34012

Tubing Weight, Natural

Qosina part number 34012 is an autoclavable PTFE tubing weight ideal for keeping tubing at the bottom of a container. It could be used as an alternative to rigid dip tubes and reduces the risk of suction against a container.
Fits 1/2 inch ID Tubing (0.5 inch, 12.7 mm)
PTFE
New
T7077

Pharma-Clear® LH Tubing

50A Durometer; 1/2 inch ID x 3/4 inch OD (0.5 inch x 0.75 inch, 12...
Silicone
New
T4120

Tygon® ND-100-65 Tubing

65A Durometer; 1/2" ID x 3/4" OD (0.5 inch x 0.75 inch 12.70 mm x ...
DEHP-Free PVC
New
T2233

Sani-Tech® SPT-60L Tubing

Sani-Tech® SPT-60L is a premium platinum-cured silicone tubing designed for extended duration pumping including final filling. It provides best-in-class accuracy and precision to ensure consistent filling performance and reduces the potential for costly over or under fills. In addition, Sani-Tech® SPT-60L provides a long pump life, low spallation, and delivers ideal performance for the most demanding operations. Sani-Tech® SPT-60L is not intended to be used as part of an implantable device.
60 A Durometer; 1/2 inch ID x 3/4 inch OD (0.5 inch x 0.75 inch, 1...
Silicone
New
T7045

Pharma-Line™ I Tubing

68A Durometer; 1/2 inch ID x 3/4 inch OD (0.5 inch x 0.75 inch, 12...
TPV
New
T7060

Cellgyn® TPE Tubing

68A Durometer; 1/2 inch ID x 3/4 inch OD (0.5 inch x 0.75 inch, 12...
TPE
New
T7028

Pharma-Clear® 65 Tubing

61A Durometer; 1/2 inch ID x 3/4 inch OD (0.5 inch x 0.75 inch, 12...
Silicone
New
T2310

Braided Tuflux® SIL Tubing

60A Durometer; 1/2 inch ID x 7/8 inch OD (0.5 inch x 0.875 inch, 1...
Silicone, PET
New
62242

NovaSeal™ Pinch Pipe

This NovaSeal™ pinch pipe can be installed on compatible tubing and used to seal and separate the flow path once the pinch pipe is crimped and cut, enabling the sterile separation of tubing in controlled and non-controlled environments. Compatible with a variety of silicone and TPE tubing, this pinch pipe is designed for use with the battery-powered NovaSeal™ crimping tool. Please contact Qosina for a list of compatible tubing.
Fits 1/2 inch ID x 3/4 inch OD Tubing (0.5 inch x 0.75 inch, 12.7 ...
Nickel Plated Brass
New
62246

NovaSeal™ Cap

Fits 1/2 inch OD Tubing (0.5 inch, 12.7 mm)
Silicone
New
51760

Lynx® ST Connector, Barbed

Lynx® ST (Steam-To) connectors enable integration of steamable hard-piped process equipment with single-use fluid paths. Featuring high-temperature resistant polyetherimide (PEI) and silicone seals, the sanitary flange fitting allows for connection of the disposable fluid path to stainless-steel equipment.
0.5 inch/0.75 inch Mini x Fits 1/4 inch ID Tubing (0.25 inch, 6.35...
PEI, Silicone