New Products

Manufactured by DuPont™ Liveo™ Healthcare Solutions, this Liveo™ Pharma-80 silicone tubing is designed for the transfer of high-purity fluids in pharmaceutical and biotechnological manufacturing processes in vacuum applications or those with moderate to high pressures. This product is not to be used in medical applications involving implantation in the human body or contact with internal body fluids and tissues for longer than 72 hours.

Manufactured by DuPont™ Liveo™ Healthcare Solutions, this Liveo™ Pharma-65 silicone tubing is designed for the transfer of high-purity fluids in pharmaceutical and biotechnological manufacturing processes. This product is not to be used in medical applications involving implantation in the human body or contact with internal body fluids and tissues for longer than 72 hours.

Manufactured by DuPont™ Liveo™ Healthcare Solutions, this Liveo™ Pharma TPE Tubing is weldable and designed for the transfer of high-purity fluids in pharmaceutical and biotechnological manufacturing processes. This product is not to be used in medical applications involving implantation in the human body or contact with internal body fluids and tissues for longer than 72 hours.

Manufactured by DuPont™ Liveo™ Healthcare Solutions, this Liveo™ Pharma-50 silicone tubing is designed for the transfer of high-purity fluids in pharmaceutical and biotechnological manufacturing processes. This product is not to be used in medical applications involving implantation in the human body or contact with internal body fluids and tissues for longer than 72 hours.

Qosina part number 34012 is an autoclavable PTFE tubing weight ideal for keeping tubing at the bottom of a container. It could be used as an alternative to rigid dip tubes and reduces the risk of suction against a container.

OneShot™ single-use filling needles boost production by reducing filler line downtime and eliminate the risk of cross contamination as well as the need for costly cleaning and validation. Featuring a polycarbonate hub and 316L stainless steel needle, they are available in a variety of styles as OEM replacements for the most popular fill-finish brands.

Qosina part number 20504 is a high-performance fluid storage and transfer bag chamber ideal for bioprocessing applications requiring reduced risk of product loss, contamination and comprised quality for critical process fluids and high-value final products. Manufactured with gamma-stable fluoropolymer, this single-layer film does not contain curing agents, antioxidants, plasticizers, or adhesives.  Additionally, 20504 has a low particle count, greatly reducing the potential for process fluid contamination. This film provides high purity, exceptional compatibility, increased safety, and has a wide operating temperature range of -196°C to 121°C, making it extremely durable in frozen applications. Featuring a fluoropolymer boat port design and including a hanging opening for improved handling, 20504 has comprehensive chemical compatibility including 100% DMSO.

Qosina part number 28632 is a robust fluid storage and transfer bag chamber ideal for upstream and downstream bioprocessing applications. Manufactured with Flexsafe® S80 film, this multilayer film is composed of a polyethylene (PE) contact layer and co-extruded PE-EVOH-PE backbone structure, allowing for superior gas barrier properties. This film offers excellent biocompatibility, a low extractables profile, and superior strength and flexibility. It features a boat port design, made of PE, and includes a hanging hole for improved handling.

Qosina part number 42011 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.

Qosina part number 42001 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.

Lynx® ST (Steam-To) connectors enable integration of steamable hard-piped process equipment with single-use fluid paths. Featuring high-temperature resistant polyetherimide (PEI) and silicone seals, the sanitary flange fitting allows for connection of the disposable fluid path to stainless-steel equipment.

Qosina part number 42031 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.

Qosina part number 42021 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.

Qosina part number 42012 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.

Qosina part number 42002 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.

Qosina part number 42044 is a molded tubing component eliminating the need for retention devices on molded connections and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 18 inches of tubing on all sides, allowing it to be cut to length before incorporating into a single-use design if required. This item is manufactured in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.

Qosina part number 42064 is a molded tubing component eliminating the need for retention devices on molded connections and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 18 inches of tubing on all sides, allowing it to be cut to length before incorporating into a single-use design if required. This item is manufactured in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.

Qosina part number 42054 is a molded tubing component eliminating the need for retention devices on molded connections and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 18 inches of tubing on all sides, allowing it to be cut to length before incorporating into a single-use design if required. This item is manufactured in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.

Manufactured by DuPont™ Liveo™ Healthcare Solutions, this Liveo™ Pharma-50 silicone tubing is designed for the transfer of high-purity fluids in pharmaceutical and biotechnological manufacturing processes. This product is not to be used in medical applications involving implantation in the human body or contact with internal body fluids and tissues for longer than 72 hours.