New Products

View as Grid List
Sort by
Display per page
RSS
New
42033

Molded Sanitary Flange Component, AdvantaSil® APSH Braid-Reinforce...

Qosina part number 42033 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
1 inch/1.5 inch Standard; 50A Durometer; 1/2 inch ID x 3/4 inch OD...
Silicone, SS
New
42032

Molded Sanitary Flange Component, AdvantaSil® APSH Braid-Reinforce...

Qosina part number 42032 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
1 inch/1.5 inch Standard; 50A Durometer; 3/8 inch ID x 5/8 inch OD...
Silicone, SS
New
42031

Molded Sanitary Flange Component, AdvantaSil® APSH Braid-Reinforce...

Qosina part number 42031 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
0.5 inch/0.75 inch Mini; 50A Durometer; 3/8 inch ID x 5/8 inch OD ...
Silicone, SS
New
42025

Molded Sanitary Flange Component, AdvantaSil® APSH Braid-Reinforce...

Qosina part number 42025 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
1.5 inch Standard, 65A Durometer; 1 inch ID x 1 3/8 inch OD (1 inc...
Silicone, PSU
New
42024

Molded Sanitary Flange Component, AdvantaSil® APSH Braid-Reinforce...

Qosina part number 42024 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
1.5 inch Standard, 65A Durometer; 3/4 inch ID x 1 1/8 inch OD (0....
Silicone, PSU
New
42023

Molded Sanitary Flange Component, AdvantaSil® APSH Braid-Reinforce...

Qosina part number 42023 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
1 inch/1.5 inch Standard; 50A Durometer; 1/2 inch ID x 3/4 inch OD...
Silicone, PSU
New
42021

Molded Sanitary Flange Component, AdvantaSil® APSH Braid-Reinforce...

Qosina part number 42021 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
0.5 inch/0.75 inch Mini; 50A Durometer; 3/8 inch ID x 5/8 inch OD ...
Silicone, PSU
New
42015

Molded Sanitary Flange Component, C-Flex® 374 Tubing

Qosina part number 42015 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
1 inch/1.5 inch Standard; 50A Durometer; 3/4 inch ID x 1 inch OD (...
TPE, PSU
New
42014

Molded Sanitary Flange Component, C-Flex® 374 Tubing

Qosina part number 42014 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
1 inch/1.5 inch Standard; 50A Durometer; 1/2 inch ID x 3/4 inch OD...
TPE, PSU
New
42013

Molded Sanitary Flange Component, C-Flex® 374 Tubing

Qosina part number 42013 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
1 inch/1.5 inch Standard; 50A Durometer; 3/8 inch ID x 5/8 inch OD...
TPE, PSU
New
42012

Molded Sanitary Flange Component, C-Flex® 374 Tubing

Qosina part number 42012 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
0.5 inch/0.75 inch Mini; 50A Durometer; 3/8 inch ID x 5/8 inch OD ...
TPE, PSU
New
42011

Molded Sanitary Flange Component, C-Flex® 374 Tubing

Qosina part number 42011 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
0.5 inch/0.75 inch Mini; 50A Durometer; 1/4 inch ID x 3/8 inch OD ...
TPE, PSU
New
42005

Molded Sanitary Flange Component, Liveo™ Pharma-50 Tubing

Qosina part number 42005 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
1 inch/1.5 inch Standard; 50A Durometer; 3/4 inch ID x 1 inch OD (...
Silicone, PSU
New
42004

Molded Sanitary Flange Component, Liveo™ Pharma-50 Tubing

Qosina part number 42004 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
1 inch/1.5 inch Standard; 50A Durometer; 1/2 inch ID x 3/4 inch OD...
Silicone, PSU
New
42003

Molded Sanitary Flange Component, Liveo™ Pharma-50 Tubing

Qosina part number 42003 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
1 inch/1.5 inch Standard; 50A Durometer; 3/8 inch ID x 5/8 inch OD...
Silicone, PSU
New
42002

Molded Sanitary Flange Component, Liveo™ Pharma-50 Tubing

Qosina part number 42002 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
0.5 inch/0.75 inch Mini; 50A Durometer; 3/8 inch ID x 5/8 inch OD ...
Silicone, PSU
New
42001

Molded Sanitary Flange Component, Liveo™ Pharma-50 Tubing

Qosina part number 42001 is a molded sanitary flange component composed of a molded gasket, backing cup and tubing. This item combines standard tubing with a molded sanitary end connection functioning as an alternative to barbed sanitary flanges, eliminating the need for retention devices and reducing risk of leaks and bioburden entrapment issues associated with barbed fittings. This item is offered as a standard component with 72 inches of tubing, allowing it to be cut to length before incorporating into a single-use design. This item is injection molded in an ISO Class 7 cleanroom environment, and all materials meet USP Class VI requirements.
0.5 inch/0.75 inch Mini; 50A Durometer; 1/4 inch ID x 3/8 inch OD ...
Silicone, PSU
New
17559

RondelO™ 4-Way Stopcock Manifold with 4 Female Luer Locks, Tubing ...

The RondelO™ has a through line for a flushing fluid and 2, 4 or 6 luer inlet ports. Each luer port is 80369-7 compliant. There is a dedicated flushing position between each luer inlet port to ensure the line can be easily flushed between medications. The flushing position will also eliminate any “dead space” in the line that could be caused from disconnecting and changing different drug lines.
Fits 0.118 ID x 0.161 inch OD Tubing (3 mm x 4.1 mm); 29 PSI
COPE, HDPE
New
17558

RondelO™ 6-Way Stopcock Manifold with 6 Female Luer Locks, Tubing ...

The RondelO™ has a through line for a flushing fluid and 2, 4 or 6 luer inlet ports. Each luer port is 80369-7 compliant. There is a dedicated flushing position between each luer inlet port to ensure the line can be easily flushed between medications. The flushing position will also eliminate any “dead space” in the line that could be caused from disconnecting and changing different drug lines.
Fits 0.118 ID x 0.161 inch OD Tubing (3 mm x 4.1 mm): 29PSI
COPE, HDPE
New
61889

Female Luer Lock to Barb Connector

Fits 1/8 inch ID Tubing (0.125 inch, 3.2 mm)
PC
New
AQG17MPCHT

AseptiQuik® G Connector, Genderless, MPC Insert, High Temperature

Manufactured by CPC®, this AseptiQuik® connector provides a quick and easy sterile connection, a critical capability for biopharmaceutical manufacturers. Featuring an easy-to-use, three-step design and a wide range of options, Qosina part number AQG17MPCHT allows easy transfer of media with less risk of error. This connector also features a genderless, high-temperature design and MPC insert. Made from polycarbonate and silicone, this aseptic connector's robust, reliable performance eliminates the need for clamps, fixtures or tube welders, providing high quality, single-use connections every time.
PC, Silicone, Hydrophobic PES, PTFE
New
AQG17MPC

AseptiQuik® G Connector, Genderless, MPC Insert

Manufactured by CPC®, this AseptiQuik® connector provides a quick and easy sterile connection, a critical capability for biopharmaceutical manufacturers. Featuring an easy-to-use, three-step design and a wide range of options, Qosina part number AQG17MPC allows easy transfer of media with less risk of error. This connector also features a genderless design and MPC insert. Made from polycarbonate and silicone, this aseptic connector's robust, reliable performance eliminates the need for clamps, fixtures or tube welders, providing high quality, single-use connections every time.
PC, Silicone, PE
New
New