BIY Assemblies

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting the female luer locks on a 4-way stopcock (99781) to two syringes (C1084), you can mix substances before delivery. Utilize a non-vented female cap (65700) to close the open male luer lock port on the stopcock. Additional material and size options may be available. Contact our sales team to lean more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting a male luer lock to barb connector (11553) on the inlet of a hydrophobic filter (28213), and a female luer lock to barb (11554) to the filter outlet, you can create a barbed hydrophobic filter assembly. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting a female luer lock to barb connector (11394) to the swivel male luer lock of a 3-way stopcock (99730) and a male luer lock to barb connector to each of the female luer lock ports, you can easily add tubing to a stopcock. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. Easily reduce the size of a breathing bag's (54938) oxygen bushing by utilizing reducer connectors (5099 and 51054). Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting a closed male luer lock valve connector (90402) to a PVC tube (T4306) and a male luer with spin lock to barbed connector, you can create an extension line that can aspirate or drain fluid. Include a pinch clamp (13600) to control the flow of fluids. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting a PVC tube (T4306) to a dual check valve (QOS5401086SN), you can add a male luer lock connector (89342) to the tube to easily transfer fluids from one receptacle to another. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting the male luer slip on a 4-way stopcock (99773) to the female luer lock port of the same 4-way stopcock (99773), you can create a manifold that features two swabbable valves with the ability to control the flow. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting multiple tuohy borst adapters to a Y connector (83010), you can create sealed ports on all access points. Connect a FLO 30™ tuohy borst adapter (80330) to the bottom port of the Y connector while connecting a self-sealing hemostasis valve (33058) to the top port to create this sub-assembly. Add a swabbable injection site (80147) to the female luer lock side port to aid in irrigation. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. You can connect a PVC tube (T4304 ) to a male ENFit® connector to create a transfer tube, which can withdraw fluids from deep packaging. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting a female ENFit® connector (40071) to a PVC tube (T4306) and ENPlus spike (40009), you can create an extension line that helps prevent small-bore misconnections. Include a pinch clamp (13606) to control the flow of fluids. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting a 1-way stopcock (99759) to a female to male luer lock extension line (36213), you can add flow control to your fluid connection. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting a 3-way stopcock (99520) to a standard male to female extension line (33061), you can enhance the line by adding flow control and additional ports for fluid connection. Incorporate caps (11639) to complete the extension. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By utilizing a parallel Y connector (83057), you can create a tubing line that joins two lines into one. Simply connect a PVC tube (T4305) and multiple luer lock connectors with caps (65106, 65245, 80385 and 65501) to your parallel connector to create this extension line. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting a large-bore, high-flow female connector (98613) to the oral slip connector of a female luer lock to oral slip connector (23273), you can create a tube set to bag adapter. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting a large-bore, high-flow male connector (98653) to the oral slip connector of a female luer lock to oral slip connector (23273), you can create a tube set to bag adapter. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By combining a flow controller (21292) with a PVC tube (T4306), male and female luer lock connectors (65260 and 712991) and injection site (80005), you can create an extension line that boasts flow control and line access . Include a cap (65511) to complete this sub-assembly. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By bonding a PVC tube (T4306) into the female luer lock sidearm of a hemostasis valve (80328), you can add a 4-way stopcock (99680) to the other end of the tube, creating a 4-way stopcock sideport. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting the male luer on the swabbable valve (80326) to the female side port of the hemostasis valve (80147), you can add a leak-resistant seal on the sideport access for flushing and lubrication. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting PVC tubing (T4300) to the tubing ports on a double T injection site connector (80016), you can then connect female luer locks (65202) to the tubes with swabbable valves (80213), that will create a unique combination for injection and sampling. Include slide clamps (12064) to control the flow. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting PVC tubing (T4313) to a barbed insufflation filter (11679) and male luer lock connector (90245), you can create an extension line that filters gas. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting a PVC tube (T4311) to a large-bore female connector (99921), you can create an extension line that allows you to extract or dispense fluids. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting the male luer lock on luer activated valves (80363) to the female luer locks of a Y connector (65925), you can offer bidirectional access to a line. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting female luer locks (11530) and a bayonnet fitting (64113) to our plastisol Y connector (81250), you can create a blood pressure cuff adapter. Utilize a cable tie (99989) to secure the connection. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED

With thousands of stock components, it is easy to build your own sub-assemblies from our line of products. By connecting a sanitary flange (51606) to C-Flex tubing (T2205) using a non-reopening cable tie (99990), you can create a quick extension line for your bioprocessing project. Additional material and size options may be available. Contact our sales team to learn more.
ⓘ ASSEMBLY REQUIRED