Keyword or Part #:

Category:

I.D. PIN GAUGES Measures I.D. from 1mm to 22mm with corresponding measurements in inches (.039" to .860") and French sizes (3FR to 66FR)

O.D. TUBE GAUGE
Slide a tube down the slot to read the O.D. in both French sizes (1FR to 66FR) and millimeters (.33mm to 22mm)

NEEDLE GAUGE
The open slot determines O.D.
from 13 to 27 gauge (.095" to .016")

CAP GAUGE
Measures interior size of a bottle cap from 8mm to 110mm

RADII
The corners feature radii of .12, .25, .38, .50, .63, .75, .88 and 1.0 inch

O.D. RING GAUGES
Measure O.D. from 1mm to 22mm with corresponding measurements in inches (.039" to .860") and French sizes (3 FR to 66FR)

METRIC AND INCH RULER
The ruler is marked in inches (to 6") and centimeters (to 16cm)

METRIC DIAMETER THREAD GAUGE
Measures metric thread sizes from 1.6mm to 14mm

MAGNIFYING GLASS
The 22mm I.D. gauge has a maximum magnification level of 8x

UNIFIED DIAMETER THREAD GAUGE
Measures unified (U.S. Standard) thread sizes from 1 (.073") to 1/2 (.500")

BOTTLE NECK GAUGE
Measures exterior size of a bottle neck from 8mm to 110mm

150-Q Executive Drive, Edgewood, New York 11717-8329 U.S.A.
PHONE: (631) 242-3000 • FAX: (631) 242-3230 • E-Mail: info@qosina.com